チューニング · 2011年から
New shop · Kankakee, IL

Standalone ECU tuning since 2011. Bring it to the new shop in Kankakee, or tune live from anywhere in the world. He's tuned cars in the UK from the US.

New shop ✿Kankakee, IL601 W Jeffery St ✿Dyno · Road · Remote
Tuning

Two ways in.
One tuner.

Same process, same attention to detail, whether your car is in the bay or on the other side of the world. If it runs a standalone ECU, Mike can map it.

Miata engine bay on a Link ECU buildIn the shop · Kankakee, IL

Bring it
to the bay.

Drop it off at the new shop. Base map, logging, dyno and road tuning, and fabrication under one roof, and you leave with a car that idles, drives and pulls right.

  • Dyno & road tuning
  • Fabrication
  • Logging
  • Break-in
Plan a visit →
Mike tuning a car on a laptopRemote · anywhere

Tune from
anywhere.

We connect to your laptop over AnyDesk and do the setup live, then map from your datalogs. On your local dyno or out on the road, we tune it with you in real time.

  • Live sessions
  • Datalog review
  • Remote dyno & road
  • Worldwide
Book remote →
Process

Rough to
rock solid.

Scroll the four stages and watch the air-fuel trace come in line. Every Sakura tune follows the same A-to-Z path.

Stage 01

Custom base map

A live session to build a base map for your exact engine, injectors and sensors. Any issue that would stop the car from running gets found here, before it costs you.

Stage 02

Logging & idle

Cold start, idle and drivability get dialled in live. Fresh engine? We help you break it in properly and troubleshoot as it goes.

Stage 03

Dyno or road tune

On a dyno or out on the road, in the shop or remote with your local facility, we optimise fuel, timing and boost in real time against every target.

Stage 04

Real-world polish

We review more logs after the dyno so the calibration matches how you actually drive. No closed-loop idle hunts, no stalls, just smooth.

Builds

Tuned by
Sakura.

A few of the cars that have been through the process, from built Miatas to RB26 GT-Rs.

Pink livery Mazda Miata NB1Featured build Link ECU · Built NB1

Pink
NB1.

Red widebody Mazda RX-7 Holley Terminator

Built 6.0 LS

Yellow Nissan Skyline R33 GT-R Haltech ECU

RB26 GT-R

Orange Nissan 200SX on a lift Remote · UK

CA18DET 200SX

Red Acura NSX Haltech ECU

Supercharged NSX

1UZ V8 swap build in progress Customer build

1UZ swap

Pricing

Price your
tune.

Real remote-tune prices, no "call for a quote". Pick your setup and see exactly what it costs. The full A-to-Z service, from base map to final polish.

ECU platform
Induction
Extras
FAQ

Remote tuning,
explained.

Never had a car tuned from another state? Here's exactly how it works, and how to get your car ready.

01 · Your carLaptop plugged into the ECUTuning software open, cable connected
02 · MikeTunes it liveBase map, idle, logging, calibration
03 · Road or dynoTuned in real timeThen a final real-world log review
How does remote tuning work?

You plug your laptop into the car's ECU, and Mike connects to that laptop over AnyDesk. He does the setup live, building a base map for your exact engine and sensors and getting the car started and idling. Then he maps the car from your datalogs.

When it's ready, you take it out on the road or onto a local dyno and he tunes it with you in real time. A final review of real-world logs makes sure it drives right.

What do I need on my end?
  • A laptop with your ECU's tuning software installed and up to date
  • Your ECU's tuning cable
  • An internet connection for the AnyDesk session
  • A wideband O2 sensor, installed and working
  • Every sensor installed, connected and working

The full checklist is below.

Do I need a dyno?

No. Mike tunes on the road or on a dyno. If you're tuning on the road, have a safe place to drive and log the car. If you're going to a dyno, book it for the live session. Local to Kankakee? Bring it to the shop instead.

Which ECUs do you tune?

Link, Haltech, MoTeC, Emtron, MaxxECU, ECUMaster, Holley, AEM, Megasquirt, Hondata and Motorsport Electronics. Running something else? Ask, and if it's a standalone ECU, Mike can likely map it.

How much does it cost?

Each ECU platform has a base remote-tune price, and it goes up with turbo or ITBs, VVT, boost control and flex fuel. Price your exact setup to see the live store price.

How do I book?

Pick your ECU's remote tune in the store, choose the options that match your car, and check out. You'll get a confirmation email with instructions to schedule your first live session. You can also message on Facebook or use the form below to set a day and time.

I have a fresh engine. Can you still tune it?

Yes. During the logging stage Mike helps you break in a fresh engine properly and troubleshoots anything that comes up before it's pushed.

2011 Tuning since
107 Facebook reviews
100% Recommend (Facebook)
11 ECU platforms tuned
Reviews

"Just go
with Mike."

Chris W.'s car
Mike tuned my CA18DET 200SX the other day and did an amazing job. Very knowledgeable and a nice guy. The car is running better than ever and it still amazes me that the car is here in the UK and he tuned it from the US!
Chris W.CA18DET 200SX · United Kingdom
Recommends
Mike helped me sort out a previous tune on my 2002 turbo Miata that had idle and stalling issues from a previous reputable tuner… Absolutely no issues with the tune or idle - it has been rock solid. If you are debating tuners, just go with Mike.
Joseph G.2002 Turbo Miata
Recommends
Mike did an awesome job tuning my Beams AE86. Very responsive to messages and knowledgeable. Remote tuning was a big convenience as well. Car rips now. Would recommend!
Lucas M.Beams AE86
Recommends
Mike helped me get my 1uz car running and has continued to give me technical support and even went out of his way to help me find a shop to work out a transmission issue I'm having.
Bryce O.1UZ build
Recommends
This guy knows his stuff and couldn't ask for better communication! Great tuner, definitely recommend!!
Billy Y.Facebook review
Recommends
Visit

Come see
the shop.

The new home of Sakura Garage. Book a dyno or road tune, drop off a project or just come talk shop.

601 W Jeffery StKankakee, IL 60901
Directions →
Hours
Mon – Fri 9am – 5pm
Sat – Sun By appointment