Sakuragarage
S15Link - NS15X - 64 Pin
S15Link - NS15X - 64 Pin
Couldn't load pickup availability
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for the SR20 engine. This ECU will work with the 64 pin, blue header plug ECU version.
- Please check your connector matches the header in the listed photo before purchasing.
- This ECU works for manual transmissions only.
- ECU includes an onboard 7 bar MAP sensor.
- Most factory features are supported.
- Check the features tab for I/O expansion options.
- This ECU now includes E-Throttle as standard.
- Now with 4 pin powered CAN connector (See note below).
Suitable Applications:
S13 Silvia / 180SX SR20DET (but not CA18DET)
S14a Silvia (facelift) SR20DET
S15 Silvia SR20DET
S15 Silvia SR20DE
RNN14 Pulsar GTI-R SR20DET
N15 Pulsar SR16VE
N14 Distributed
*For the 76 pin header ECU, have a look at the S13X PlugIn listing.
Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.
- Up to 6D fuel and ignition mapping
- Precision closed loop cam control (four cam, independent control)
- Sequential fuel delivery
- Digital triggering, all OEM patterns
- OEM idle hardware supported
- 5D boost control with three switchable tables
- Motorsport features - antilag, launch, flat shift
- Continuous barometric correction (on board)
- CAN port
- QuickTune - automated fuel tuning
- Individual cylinder correction
- USB tuning cable included
- Stats recording into on-board memory
- Gear compensations for spark, boost and fuel
- Real time selectable dual fuel, ignition and boost maps
- Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
- Boost control referenced to gear, speed or throttle position
- 512 mega bytes data logging memory
- Staged injection
- Knock with "windowing"
I/O Expansion Options:
The following expansion connector inputs/outputs are provided:
On Board MAP - An Volt 3
E-Throttle Relay - Aux 12
Expansion connectors
Expansion 1 - Signal Ground
Expansion 2 - +5V Out
Expansion 3 - An Volt 5
Expansion 4 - An Volt 6
Expansion 5 - An Volt 7
Expansion 6 - An Volt 8
Expansion 7 - Aux 9
Expansion 8 - Aux 10
Expansion 9 - Signal Ground
Expansion 10 - +5V Out
Expansion 11 - Aux 11
Expansion 12 - DI 6
Expansion 13 - DI 7
Expansion 14 - An Volt 9
Expansion 15 - An Temp 3
Expansion 16 - An Temp 4
Download Manual
Click here to download the user manual.
Reviews
-
Alec H
I worked with Mike Drexel on a remote tune for my ‘97 Miata with MS3 and a mildly build NA motor. I drove my <500 mile built motor 6hrs to tail of the dragon on MS3 basemap, he got me booked for a remote tune in the morning the next day and even with not the best internet connection he got me sorted within 7 logs and it drove phenomenally well the entire rest of the week I was down there. Good power, Always started hot or cold, idled well, fans or accessories didn’t kill it at idle and it was over all very smooth even when getting stuck behind Harleys going 5mph on dragon. Cannot thank him enough.
-
Nick L
My project was to Megasquirt swap a 1998 Suzuki Carry Kei Truck. I installed a GT15 turbo, LS2 coils, Subaru STI injectors, and many other modifications.I learned about Mike from a Megasquirt Facebook group I was in. I originally didn’t listen to his advice, and decided to try and diagnose and tune everything myself. After spending days trying to figure out the issue, I decided to throw in the towel and reach back out to Mike.Mike worked remotely with me tirelessly through the night to rectify the issues I was having with this one-off install. Mike is an absolute wizard with diagnosing and tuning. From the first tune file I could tell Mike was on a level that my previous tuners were not. His response time is incredibly fast for the work he does, and he’s very patient, even with my thousand questions. When we finished with the 93 octane tune I was so impressed that I made the call to go ahead and tune on e85. After a few more revisions we had a completed 93 octane and e85 tune. This further gained power, and truly made the truck how I wanted it to feel from the time I started the build. Mike is a master of his craft, and he will be my tuner from here on out.
-
Tristian F
I brought my Z 32 to @mike Drexel he came highly recommended and did not disappoint. Been driving it quite a bit and has been running absolutely phenomenal. I took it to my first car show and one it !! Can’t thank Mike Drexel and Sakura Garage enough !!
