Skip to product information
1 of 2

Sakuragarage

EVOLink (IV-VIII) - EVO8X

EVOLink (IV-VIII) - EVO8X

Regular price €1.800,95 EUR
Regular price Sale price €1.800,95 EUR
Sale Sold out

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

This ECU is designed for the EVO 4-8 4G63 engine. 

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Includes onboard 4 bar or 7 bar MAP sensor 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options 


Suitable applications:  

CN9A Lancer Evolution 4 

CP9A Lancer Evolution 5, 6 & 6.5 (TME) 

CT9A Lancer Evolution 7 

CT9A Lancer Evolution 8 (models with 4-plug ECU only) 

*Some EVO 8’s have a 3 plug ECU. These applications will need the EVO9X Link ECU

 

G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

I/O Expansion Options
The following expansion connector inputs/outputs are provided: 
The Mitsubishi Lancer Evolution IV - VIII plug-in ECU has two expansion connectors. 

Expansion connector 1:
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 7                Digital input 
DI 8                Digital input 
DI 9                Digital input 
Aux 4                Auxiliary Output 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output 

Expansion Connector 2 
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
Aux 9                EThrottle - can't be used as an Aux Out 
Aux 10                Auxiliary Output 
An Volt 6        Analog 0-5V input 
An Volt 7        Analog 0-5V input 
An Volt 9        Analog 0-5V input 
An Volt 10        Analog 0-5V input 

Download Manual Click here

View full details
  • Alec H

    I worked with Mike Drexel on a remote tune for my ‘97 Miata with MS3 and a mildly build NA motor. I drove my <500 mile built motor 6hrs to tail of the dragon on MS3 basemap, he got me booked for a remote tune in the morning the next day and even with not the best internet connection he got me sorted within 7 logs and it drove phenomenally well the entire rest of the week I was down there. Good power, Always started hot or cold, idled well, fans or accessories didn’t kill it at idle and it was over all very smooth even when getting stuck behind Harleys going 5mph on dragon. Cannot thank him enough.

  • Nick L

    My project was to Megasquirt swap a 1998 Suzuki Carry Kei Truck. I installed a GT15 turbo, LS2 coils, Subaru STI injectors, and many other modifications.I learned about Mike from a Megasquirt Facebook group I was in. I originally didn’t listen to his advice, and decided to try and diagnose and tune everything myself. After spending days trying to figure out the issue, I decided to throw in the towel and reach back out to Mike.Mike worked remotely with me tirelessly through the night to rectify the issues I was having with this one-off install. Mike is an absolute wizard with diagnosing and tuning. From the first tune file I could tell Mike was on a level that my previous tuners were not. His response time is incredibly fast for the work he does, and he’s very patient, even with my thousand questions. When we finished with the 93 octane tune I was so impressed that I made the call to go ahead and tune on e85. After a few more revisions we had a completed 93 octane and e85 tune. This further gained power, and truly made the truck how I wanted it to feel from the time I started the build. Mike is a master of his craft, and he will be my tuner from here on out.

  • Tristian F

    I brought my Z 32 to @mike Drexel he came highly recommended and did not disappoint. Been driving it quite a bit and has been running absolutely phenomenal. I took it to my first car show and one it !! Can’t thank Mike Drexel and Sakura Garage enough !!